CopperOptics PairGain HiGain-2 HRU-612 매뉴얼 - 페이지 13

{카테고리_이름} CopperOptics PairGain HiGain-2 HRU-612에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CopperOptics PairGain HiGain-2 HRU-612 19 페이지. Remote unit

페이지 인쇄

TABLE 3. HLU 4 CHARACTER FRONT PANEL MESSAGES (CONTINUED)

Message

VER

HLU Software Version #

LIST 0xL

HLU's List #

FRM

Frame:SF,ESF,UNFR,NONE

CODE

Line Code: AMI, B8ZS

LOSW

Loss of Sync Word

LLOS

Local Loss of Signal

RLOS

Remote Loss of Signal

DS1

DS1 BPV errors

DS0

DS0 Blocked Channels

Full Name

This is displayed during the System Settings review mode.

Depress the Mode button for 3 seconds.

Displayed during System Settings review mode defined

above.

Defines the type of frame pattern being received from the

DSX-1. Displayed during System Settings mode defined

above.

This is the line code that the HLU is set to receive and

transmit at its DSX-1 interface. Displayed during System

Settings mode defined above.

Indicates that the VHDSL loop has lost sync. Causes a

minor alarm.

Indicates that no signal is detected at the T1 input to the

HLU. Causes a minor alarm.

Indicates that no signal is detected at the T1 input to the

HRU. Causes a minor alarm.

Indicates that the number of BPVs at the HLU and HRU

DS1 inputs that have exceeded the 24 hour ES threshold.

Causes a minor alarm

Indicates status of DS0 blocked channels. NONE indicates

no channels are blocked. BLK indicates some channels are

blocked.

Section 150-612-100

Description

Revision 02

Page 13