HighSecLabs DK42PHU-3 빠른 설정 매뉴얼 - 페이지 7

{카테고리_이름} HighSecLabs DK42PHU-3에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighSecLabs DK42PHU-3 12 페이지. Secure kvm switches
HighSecLabs DK42PHU-3에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (2 페이지)

페이지 인쇄

SECTIONS

Table of Contents

oPERaTIon

Operating the KVM

Front Panel Push-Buttons

• following power up, the default channel is #1.

• Select any other channel by pressing the appropriate front panel

push button.

• The mouse cursor will be positioned at the center of the selected

computer display.

• The currently selected channel is indicated by the illumination of

the appropriate push-button.

Filtered USB Port (fUSB) Operation

• This product is equipped with a fUSb port which by default

accepts only USb authentication devices (smart card / biometric

readers).

• When a legitimate USb device is connected to the fUSb console

port the fUSb status lED on the front panel is illuminated with

steady GREEn.

• When a non-legitimate USb device is connected to the fUSb

console port the fUSb status lED on the front panel is illuminated

with steady RED.

HSL Mini-Matrix Quick Setup Guide

• once switching between channels, for example from channel #1

to channel #3, the USb device which is connected to the fUSb port

is automatically switched accordingly. This is indicated by channel

#3 fUSb lED turning steady GREEn.

• When switching to a channel that has no USb fUSb connection,

the fUSb Port remains mapped to the last channel that had a fUSb

connection.

• Press the freeze USb button on the front panel to assign the fUSb

port to a specific computer. freeze USb prevents switching the

fUSb port while the keyboard, video, mouse and audio peripherals

are switched between computers. freeze USb is useful for various

scenarios, for instance, when a USb smart card reader must

remain mapped to a certain computer.