HighSecLabs SK41PH/PHU-4 사용자 설명서 - 페이지 5
{카테고리_이름} HighSecLabs SK41PH/PHU-4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HighSecLabs SK41PH/PHU-4 13 페이지.
페이지 인쇄SECTIONS
Table of Contents
InSTaLLaTIon
Installing the KVM
General
• Verify that all peripherals and computers are turned off prior to
connecting them to the product.
• The KVM's back panel is divided into Console Ports and Computer
Ports sections.
– Connect peripherals which are due to be shared by the KVM
to the Console ports.
– Connect each computer that requires access to the shared
peripherals to a Computer port group.
– Make sure that every computer is connected to a separate
Computer port group.
– Computer port group numbers are represented by push
buttons on the product's front panel.
– Switch peripherals between computers by pressing the push
buttons on the product's front panel.
Step 1 – Connect peripherals to the KVM Console ports:
• Keyboard: Connect a USB keyboard to the corresponding KVM
console keyboard port.
• Video: Connect the monitor cable to the KVM console video port.
HSL Secure KVM Switches User Manual
1
2
• Mouse: Connect a USB mouse to the corresponding KVM console
mouse port.
• Audio peripherals: Connect headphones / speakers to the KVM
console audio-out port.
• USB peripherals: Connect USB peripherals to the KVM console
fUSB port.
Note: authentication devices such as smartcard and biometric readers are
enabled by default, other devices must be explicitly whitelisted – for further
information please refer to the KVM administrator's guide.
Smart-Card
Reader
Audio
1
2
3
4
fUSB Cable
Audio Cable
Mouse Cable
Display Cable
Keyboard Cable
3
Display
Keyboard
Mouse
CONSOLE PORTS
COMPUTER/SOURCE PORTS
Computers
4