Gallien-Krueger MB2 500 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Gallien-Krueger MB2 500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gallien-Krueger MB2 500 13 페이지. Mb2 series
페이지 인쇄
Installation:
To insure proper operation and to avoid potential
safety hazards, place the unit on a firm, level
surface.
Ventilation:
Make certain that proper space is provided for ven-
tilation. Never block the fan vent holes located on
the sides of the amplifier. If the amplifier will be
installed in a rack or other enclosed area, make
sure that there is sufficient air movement within
the enclosure to allow proper cooling. Consult
your dealer for more information. Avoid installa-
tion in extremely hot or cold locations, and areas
that are exposed to direct sunlight, or near heating
equipment. Avoid moist or humid locations.
Remember, power amplifiers generate heat. The
ventilation slots on the enclosure are specifically
designed to remove this heat. Blocking or placing
other electronic equipment near the heat-
dissipation system may possibly affect the long-
term reliability of both your amplifier and the
other equipment.
MB² SERIES
Moving the Unit:
Before moving the unit, be certain to disconnect
any interconnection cords with other components,
and make sure that you disconnect the unit from
the AC outlet.
Cleaning:
When the unit gets dirty, clean only with a dry
cloth. Never use benzene, thinner, alcohol, or
other volatile cleaning agents. Do not use abrasive
cleaners, as they may damage the finish of metal
parts. Avoid spraying insecticides near the unit.
Maintenance:
Your new amplifier is rugged. It was built to give
you a lifetime of trouble-free operation, if it is
operated in accordance with the instructions con-
tained in this manual. The only maintenance
required is cleaning. If you are going to move your
amplifier around frequently, we recommend a road
case to protect it from scratches and road wear.
Packaging:
The carton and packing materials used in shipping
your new amplifier were specifically designed to
cushion it from the shocks and vibration that occur
during transport. We suggest that you save the
carton and packing materials for use in shipping, in
the event you move, or the amplifier needs repair.
10