Gallien-Krueger MB500 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Gallien-Krueger MB500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gallien-Krueger MB500 12 페이지.
Gallien-Krueger MB500에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지)
페이지 인쇄
Installation:
To insure proper operation and to avoid potential
safety hazards, place the unit on a firm, level
surface.
Ventilation:
Make certain that proper space is provided for
ventilation. Never block the fan vent holes located
on the sides of the amplifier. If the amplifier will be
installed in a rack or other enclosed area, make sure
that there is sufficient air movement within the
enclosure to allow proper cooling. Consult your
dealer for more information. Avoid installation in
extremely hot or cold locations and areas that are
exposed to direct sunlight or near heating
equipment. Avoid moist or humid locations.
Remember, power amplifiers generate heat. The
ventilation slots on the enclosure are specifically
designed to remove this heat. Blocking or placing
other electronic equipment near the heat dissipation
system may possibly affect the long term reliability
of both your amplifier and the other equipment.
Moving the Unit:
Before moving the unit, be certain to disconnect
any interconnection cords with other components
and make sure that you disconnect the unit from the
AC outlet.
Cleaning:
When the unit gets dirty, clean only with a dry
cloth. Never use benzene, thinner, alcohol or other
volatile cleaning agents. Do not use abrasive
cleaners, as they may damage the finish of metal
parts. Avoid spraying insecticides near the unit.
MB 500
Maintenance:
Your new amplifier is rugged. It was built to give
you a lifetime of trouble free operation if it is
operated in accordance with the instructions
contained in this manual. The only maintenance
required is cleaning. If you are going to move your
amplifier around frequently, we recommend a road
case to protect it from scratches and road wear.
Packaging:
The carton and packing materials used in shipping
your new amplifier were specifically designed to
cushion it from the shocks and vibration that occur
during transport. We suggest that you save the carton
and packing materials for use in shipping in the event
you move or the amplifier needs repair.
10