Frigidaire BGHD2433KW0 사용 및 관리 매뉴얼 - 페이지 5

{카테고리_이름} Frigidaire BGHD2433KW0에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Frigidaire BGHD2433KW0 20 페이지.

페이지 인쇄

Getting

Started

Load dishwasher (See Preparing and Loading

Dishes).

Add detergent (See Dishwasher Dispenser &

Detergents).

Add rinse aid (See Rinse Aid).

Select desired CYCLE (See Cycle Chart). The

indicator light above the pad will glow when selected.

Select desired OPTIONS (See Energy Options). The

indicator light above the pad will glow when selected.

Run hot water faucet nearest dishwasher until water

is hot. Turn water off.

To start, press START/CANCEL pad.

8. Close door to latch.

The dishwasher is programmed to remember your last cycle

Options Selections

Wash

Pressure

The WASH PRESSUREoption allows you to select the

desired wash pressure depending on your dishload. When

HIGH WASH PRESSUREis selected, the wash pressure is

increased by 30% to provide faster and more effective

cleaning. When LOW WASH PRESSUREis selected, the

wash pressure is decreased by 30% to clean delicate dishes

without damage. HIGH WASH PRESSUREcan be used with

all cycles except CHINA CRYSTALand RINSE ONLY. HIGH

WASH PRESSUREis automatically provided when POWER

PLUSor QUICK CLEAN cycles are selected. LOW WASH

PRESSUREcan be used with all cycles except QUICK CLEAN

and RINSE ONLY. LOW WASH PRESSUREis automatically

provided when CHINA CRYSTAL (TOP RACK) is selected.

WASH PRESSUREmay be selected before the wash cycle is

started, or anytime during the wash cycle.

so you do not have to reset each time. To start the

dishwasher using the same cycle and options selected on

the previous wash, just press the START/CANCELpad.

Wash

Cycle Selections

Cycle times are approximate and will vary with options

selected. Hot water is necessary to activate dishwasher

detergent and melt fatty food soils. An automatic sensor

will check the incoming water temperature and, if it is

not hot enough, the timer will be delayed for automatic

water heating in the main wash of all cycles. This

happens even when HI-TEMP WASH option has not been

selected. When HI-TEMP WASH is selected, an even

higher temperature

will be guaranteed to handle heavier

soil loads.

Hi-Temp

Wash

When HI-TEMP WASH option is selected, the dishwasher

heats water in the main wash to approximately

140°F

(60°C).

This increase in water temperature

helps

dishwasher detergent remove food grease and soil from

dishes more effectively and aids in drying. This option is

available in NORMAL WASH and TOP RACK. HI-TEMP WASH

is automatically

provided when HEAVY WASH cycle is

selected.