HighSecLabs SK81HU-N 빠른 설치 매뉴얼 - 페이지 2

{카테고리_이름} HighSecLabs SK81HU-N에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighSecLabs SK81HU-N 2 페이지. 2/4/8 ports dual-head kvm switches
HighSecLabs SK81HU-N에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (15 페이지), 빠른 설정 매뉴얼 (15 페이지), 빠른 설치 매뉴얼 (2 페이지)

페이지 인쇄

Supported Hardware

The KVM switches support most standard speakers, headsets,

microphones and USB keyboards and mice.

Environmental

• Operating temperature is 32° to 104° F (0° to 40° C).

• Storage temperature is -4° to 140° F (-20° to 60° C).

• Humidity requirements are 0-80% relative humidity,

non-condensing.

Safety and Regulatory Statements

Safety Symbols

One or more of the following symbols may be included in your

product documentation and/or on the product.

Instructions: This symbol is intended to alert the user to

the presence of important operating and maintenance

(servicing) instructions in the product user manual.

Dangerous Voltage: This symbol is intended to alert the

user to the presence of uninsulated dangerous voltage

within the product's enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

Power On: This symbol indicates the principal on/off

switch is in the on position.

Power Off: This symbol indicates the principal on/off

switch is in the off position.

Protective Grounding Terminal: This symbol indicates a

terminal which must be connected to earth ground prior

to making any other connections to the equipment.

All other marks are the property of their respective owners. Images for demonstration purposes only.

SK21D/P/H-N • SK41DU/PU/HU-N • SK81DU/PU/HU-N

SK21x-N Dimensions

177 (W) x 82 (D) x 35 (H) mm, Weight: 0.52 kg

SK41xU-N Dimensions

342 (W) x 148 (D) x 42 (H) mm, Weight: 1.6 kg

SK81x/xU-N Dimensions

440 (W) x 192 (D) x 44 (H) mm, Weight: 2.6 kg

Safety Precautions

WARNING: To avoid a potentially fatal shock hazard and possible damage

to equipment, please observe the following precautions.

• Do not disable the power grounding plug. The grounding plug

is an important safety feature.

• Plug the power cord into a grounded (earthed) outlet that is

easily accessible at all times.

• Disconnect the power from the product by unplugging the power

cord from either the electrical outlet or the product. The AC inlet

is the main disconnect for removing power to this product. For

products that have more than one AC inlet, to remove power

completely, all AC line cords must be disconnected.

• This product has no serviceable parts inside the product

enclosure. Do not open or remove product cover.

CAUTION: Some HSL products contain a lithium battery. This battery is not

a field replaceable item, and replacement should not be attempted by a

user. If errors occur when using the product and the battery is suspected,

contact HSL Technical Support.

WARNING: For Service Personnel Only - There is a risk of explosion if

the battery is replaced with an incorrect type. Dispose of used batteries

according to the manufacturer's instructions.

This product is for use with other products that are Listed or

Certified by a Nationally Recognized Testing Laboratory (NRTL).

| QUICK INSTALLATION GUIDE

HDC14845 Rev. 1.0