Dynex DX-37L200A12 중요 정보 매뉴얼 - 페이지 6
{카테고리_이름} Dynex DX-37L200A12에 대한 중요 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-37L200A12 12 페이지. Quick setup guide (french)
Dynex DX-37L200A12에 대해서도 마찬가지입니다: 매뉴얼 (6 페이지), 빠른 설정 매뉴얼 (2 페이지), 제품 사양 (1 페이지), (스페인어) 중요 정보 (12 페이지), (빠른 설치 가이드 (2 페이지), (프랑스어) 중요 정보 (12 페이지), (프랑스어) 빠른 설치 매뉴얼 (2 페이지)
페이지 인쇄
4
DX-37L200A12
Problem
Solution
Dark, poor, or no picture
• Try another channel. The station may be experiencing
(screen is lit), but sound is
problems.
good.
• Make sure that the antenna or cable TV is connected
correctly and securely. See "Connecting a cable or
satellite box" or "Connecting an antenna or cable TV (no
box)" in the online User Guide.
• Adjust the brightness. See "Adjusting the TV picture" in
the online User Guide.
• Make sure that the correct picture mode is selected. See
"Adjusting the TV picture" in the online User Guide.
• If you are using an antenna, the digital channel signal
may be low. To check the digital channel signal
strength, see "Checking the digital signal strength" in
the online User Guide.
• If you are using an antenna and the signal strength is
low, adjust the antenna or use a highly directional
outdoor antenna or set-top antenna with a built-in
amplifier.
• Make sure that the video cables are connected securely
to the back of your TV.
• The video cable(s) you are using may be bad. Try a new
set.
No color, dark picture, or
• Try another channel. The station may be experiencing
color is not correct.
problems.
• Adjust the color saturation. See "Adjusting the TV
picture" in the online User Guide.
• Make sure that the video cables are connected correctly
and securely to the back of your TV.
• Make sure that the antenna or cable TV is connected
correctly and securely. See "Connecting a cable or
satellite box" or "Connecting an antenna or cable TV (no
box)" in the online User Guide.
• If you are using an antenna, the digital channel signal
may be low. To check the digital channel signal
strength, see "Checking the digital signal strength" in
the online User Guide.
• If you are using an antenna and the signal strength is
low, adjust the antenna or use a highly directional
outdoor antenna or set-top antenna with a built-in
amplifier.
Only snow (noise) appears
• Try another channel. The station may be experiencing
on the screen.
problems.
• Make sure that the antenna or cable TV is connected
correctly and securely. See "Connecting a cable or
satellite box" or "Connecting an antenna or cable TV (no
box)" in the online User Guide.
• If you are using an antenna, the digital channel signal
may be low. To check the digital channel signal
strength, see "Checking the digital signal strength" in
the online User Guide.
• If you are using an antenna and the signal strength is
low, adjust the antenna or use a highly directional
outdoor antenna or set-top antenna with a built-in
amplifier.
Problem
Solution
Dotted lines or stripes
• Make sure that the antenna or cable TV is connected
appear on the screen.
correctly and securely. See "Connecting a cable or
satellite box" or "Connecting an antenna or cable TV (no
box)" in the online User Guide.
• If you are using an antenna, the digital channel signal
may be low. To check the digital channel signal
strength, see "Checking the digital signal strength" in
the online User Guide.
• If you are using an antenna and the signal strength is
low, adjust the antenna or use a highly directional
outdoor antenna or set-top antenna with a built-in
amplifier.
• Make sure that the video cables are connected securely
to the back of your TV.
• The video cable(s) you are using may be bad. Try a new
set.
• Other devices (for example, surround sound receiver,
external speakers, fans, or hair dryers) may be
interfering with your TV. Try turning off one device at a
time to determine which device is causing interference.
Once you have determined which device is causing
interference, move it further from the TV to eliminate
the interference.
Double images.
• Use a highly directional outdoor antenna, cable TV, or
satellite TV.
The picture has a few bright
• A few bright or dark spots on an LCD screen is normal. It
or dark spots.
does not affect the operation of this TV.
Good picture, but no sound.
• Increase the volume.
• Make sure that the sound is not muted.
• Make sure that the correct audio mode is selected.
• Make sure that the audio cables are connected correctly
and securely to the back of your TV.
• Make sure that the antenna or cable TV is connected
correctly and securely. See "Connecting a cable or
satellite box" or "Connecting an antenna or cable TV (no
box)" in the online User Guide.
• If you are using an antenna, the digital channel signal
may be low. To check the digital channel signal
strength, see "Checking the digital signal strength" in
the online User Guide.
• The audio cable(s) you are using may be bad. Try a new
set.
Poor picture
• Make sure that the room is not too bright. Light
reflecting off the screen can make the picture difficult
to see.
• If an S-VHS camera or a camcorder is connected while
another connected device is turned on, the picture may
be poor. Turn off one or more devices.
Good sound but poor color
•
Adjust the contrast, color, and brightness settings.
Audio noise
• Other devices (for example, surround sound receiver,
external speakers, fans, or hair dryers) may be
interfering with your TV. Try turning off one device at a
time to determine which device is causing interference.
Once you have determined which device is causing
interference, move it further from the TV to eliminate
the interference.
No output from one of the
• Adjust the audio balance. See "Adjusting sound
speakers
settings" in the online User Guide.
• Make sure that the audio cables are connected correctly
and securely to the back of your TV.
After images appear
• Do not display a still image, such as a logo, game, or
computer image, for an extended period of time. This
can cause a permanent after-image to be burned into
the screen. This type of damage is not covered by your
warranty.
Troubleshooting