Gallien-Krueger Backline100 사용 설명서 - 페이지 4

{카테고리_이름} Gallien-Krueger Backline100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gallien-Krueger Backline100 6 페이지.

Getting Started

1. Plug your guitar into the input jack and make

sure all of its volumes and tone controls are set

to "10". You can fine tune them later.

2. On the BackLine 100 - Start with the tone

controls and Presence control in the center

position (12 o'clock), all other controls on "0",

and all switches out.

3. Gradually turn up the "Clean Volume" control,

while playing, and set to desired level.

4. Experiment with the EQ Shift and tone controls

for your desired clean sound. Then add

Presence, Reverb, or the VCV

your tastes.

5. Switch to the Lead Channel by engaging the

Lead Select switch.

6. This time, turn up the "Lead Volume" slightly

and then increase the Gain until you have found

a suitable gain level (you may want to experi-

ment with the Lead 1/Lead 2 switch and the

Input Shape at this time, as well). Then continue

to set the Volume for a proper output level.

7. Again, follow the steps from 4 to fine-tune your

sound. There are many settings to experiment

with here, and you should try as many possibilities

as you can because you will probably find a

number of them that are very pleasing.

8. To help familiarized yourself with the

BackLine100's controls, you may want to use

the selected settings (shown on the right) as a

starting point. Please take note that these

settings are designed for specific guitar body

types as well as pickup configurations. Enjoy.

Selected Settings

(On Right)

• Controls shown in black are active or in the "in"

position.

• Volume settings will be somewhat dependant on

speaker configurations, desired volume level, and

outboard effects.

• Settings are intended for the BackLine 100

Combo as well as the BackLine 100 Head.

Start is a registered trademark of Fender, Les Paul is a registered

trademark of Gibson.

filter to suit