Gallien-Krueger 115MBP 소유자 매뉴얼 - 페이지 3

{카테고리_이름} Gallien-Krueger 115MBP에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gallien-Krueger 115MBP 3 페이지. Powered enclosures

페이지 인쇄

MBP Series

The MBP powered enclosures are optimized to

interface with any Gallien-Krueger product equipped

with a chain output. All EQ and volume settings

made on the primary unit are sent to the MBP,

ensuring uniform output and tone. Up to three MBP

enclosures can be linked together, allowing the user

to create the ultimate "Rig."

Connecting your MBP to a MB Combo:

Using a standard XLR microphone cable, connect the

Chain Output located on the rear panel of your MB

Combo to the Chain Input of your MBP enclosure. If

connecting multiple MBP enclosures, the Chain

Output of the MBP is connected to the additional

MBP's chain input.

Connecting your MBP to an MB Head:

When connecting an MB head to an MBP cabinet, a

cable with a male 1/4" Tip/Ring/Sleeve to a male

XLR end must be used. Plug the 1/4" TRS into the

Headphone/Line Out/Chain Out jack of the MB head

and press the corresponding button to the 2 position,

Line Out/ Chain Out.

tip ring sleeve

MB Head to MBP cable

MBP Specifications

112MBP

● 200 watts

● 1x12" speaker

● 17.75 x 15.25" x 14.75"

● 32 lbs.

212MBP

● 500 watts

● 2x12" neodymium speakers

● 26.75 x 19.5" x 14.75"

● 39 lbs.

male XLR

115MBP

● 200 watts

● 1x15" speaker

● 23.5 x 19.5" x 14.75"

● 37 lbs.

410MBP

● 500 watts

● 4x10" neodymium speakers

● 24.5" x 23.5" x 14.75

● 48 lbs.

Back Panel Features

212MBP

500W Powered Cabinet

HORN

OFF

Horn: The horn settings on the MB Combo are not

sent to the MBP cabinet. Use this switch to engage or

disengage the horn on the MBP. This feature is not

available on the 112MBP.

Chain Out: This XLR output is used to send your

signal to an additional MBP cabinet. This connection

can be made with a standard mic cable.

Chain in: This XLR input is used to connect the MBP

to a Chain Out equipped GK product.

AC Receptacle: The detachable power cord connects

here.

Power Switch: Pressing this button turns the

amplifier on and off. In the on position, the ring

surrounding the button will light red during power up

then changes to blue, indicating the amp is ready for

normal operation. Should the amp experience a fault

(over heat or over current) the amp will mute and the

ring will light red until the condition is corrected. In

the off position the amplifier is still connected to the

AC mains.

CHAIN OUT

AVERAGE PWR: 128W

FROM GK

FULL PWR: 580W

COMPATIBLE

MODEL

A C I N P U T

1 0 0 V - 1 2 0 V / 5 0 - 6 0 H z

POWER