Gallo Acoustics MICRO 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Gallo Acoustics MICRO에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gallo Acoustics MICRO 12 페이지.
STEREO AND 2.1
When using Micro loudspeakers in a stereo
or 2.1 system, you must employ a suitable
crossover or filter to ensure that only
frequencies of 80Hz and above are sent to
the loudspeakers. Attempting to playback
lower frequencies can cause permanent
damage to the loudspeaker and invalidate
the warranty.
Using speaker cables, connect the
•
speaker outputs on your stereo amplifier
to the high level inputs on the subwoofer.
Run a second set of speaker cables from
•
the high level outputs on the subwoofer
to your Micro loudspeakers.
On the subwoofer adjust the crossover to
•
around 100hz.
When music is playing, you can adjust
•
the level control to match the subwoofer
and Micro loudspeaker volume.
Consult your subwoofer owner's guide for
more detailed set up instruction.
MULTI-CHANNEL AND HOME CINEMA
When using a multi-channel surround
sound system, first ensure that you are
familiar with your amplifier's functions, to
ensure that the correct mode and settings
are applied.
Using speaker cables, connect the
•
speaker outputs from your AV Amplifier
to the Micro loudspeakers, ensuring that
each channel go to the relevant Micro
speaker.
On the AV Amplifier, select a small
•
speaker setting, or manually set the
crossover point to approximately 100hz.
Consult both your subwoofer and AV Amplifier
owner's guides for more detailed set up
instructions.
7