Galloway 1031559 사용 및 관리 지침

{카테고리_이름} Galloway 1031559에 대한 사용 및 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Galloway 1031559 4 페이지. Cushioned aluminum fully woven recliner

CUSHIONED ALUMINUM FULLY WOVEN RECLINER
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
IMPORTANT: You
IMPORTANT:
Using the lounge chair on hard surface like cement floor, wooden deck, tiles and etc. is recommended.
Using the lounge chair on soft surface like grass, leaves or sand will possibly fail the mechanism.
IMPORTANT:
IMPORTANT: DO NOT leave the lounge chair outdoors when not in use. The frame should be stored
away from rain, snow/ice.
IMPORTANT:
IMPORTANT:
You must lubricate
the key points ( ) of
the reclining mechanism
with silicon at least every
12 months.
Care and Maintenance
FRAME
To clean frame, use mild soap and water. Do not use abrasive materials, cleaners or products containing bleach.
Rinse with clean water and dry thoroughly.
To maintain frame, clean thoroughly and let it dry. Drain any water that may have collected inside the frame.
Water not drained and exposed to freezing temperatur r es may cause damage to the frame tubing.
Prior to storing, be sure to clean and thoroughly dry.
FABRIC
Sunbrella fabric should be cleaned regularly. Brush off any loose dirt and wash with a mild soap and lukewarm
®
water solution. For stubborn stains and mildew, wash with a solution of 236 ml ( 1 cup) of bleach and 59 ml (1/4 cup)
of mild soap per 3.8 l (gallon) of water. Rinse thoroughly to remove soap. Allow fabric to air dry.
Supplier: Pacific Casual L.L.C.
Address: 1060 Avenida Acaso ,Camarillo, CA 93012
TEL: 1-888-445-4533 (English, French and Spanish is offered.)
(7:30am to 4:30pm PST, Monday to Friday, for US and Canada only)
Conditions for use of the product:
This item is intended for outdoor domestic use only. Not for commercial use.
Made in China
11/11/2016
ITM. / ART. 1031559
USE AND CARE INSTRUCTIONS
There is a reclining mechanism inside the lounge chair.
Rain water will influence the functionality of the reclining mechanism.
s
RECLINING MECHANISM