Agrowtek RD8i+ 사용 설명서 - 페이지 9

{카테고리_이름} Agrowtek RD8i+에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Agrowtek RD8i+ 14 페이지. Digital intelligent dry-contact relay

Example Connections, Anden Dehu

Anden dehumidifier units can be connected to a low-voltage dry-contact for external control.

Multiple units can be daisy-chained together as shown in the diagram below.

1. Dehumidifier Unit #1

Connect a dry-contact from the RD8i relay to the "DH" contacts on the first unit.

2. Dehumidifier Unit #2

Connect the "DH" contacts of unit #2 to the "VENT" contacts of unit #1.

Setup Procedure for External Control:

1. Press any button to activate the display and ensure the unit is set to "OFF. "

2. Hold the "MODE" button for three (3) seconds to ther the installer setup menu.

3. "Remote" will be displayed on the screen.

4. Press the "MODE" button until "External Disabled" is shown on the screen.

5. Press "Up" or "Down" to set the display to "External Enabled. "

6. Press "MODE" until "Done" is shown on the screen.

7. Press the "ON" button; "External" should be shown on the screen.