Agrowtek RX1i 사용 설명서 - 페이지 2

{카테고리_이름} Agrowtek RX1i에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Agrowtek RX1i 6 페이지. Digital intelligent outlet relay

Installation Instructions

Always un-plug the relay module before servicing or wiring; ensure all power is disconnected. For continued protection against

electric shock plug into grounded outlets only and do not remove the ground pin. Install all electrical equipment and wiring in

accordance with national and local electric codes. For indoor use in dry locations only (0-80% RH non-condensing.) Do not open

Toujours non brancher le module de relais avant l'entretien ou le câblage; assurer l'alimentation est débranché. Pour une protec-

tion continue contre le bouchon de choc électrique dans des prises mises à la terre et ne pas retirer la broche de terre. Installez

tous les équipements électriques et le câblage conformément aux codes électriques nationaux et locaux. Pour une utilisation en

intérieur dans des endroits secs seulement (0-80% sans condensation.) Ne ouvrez pas le relais; il n'y a aucune pièce réparable par

General Notes:

1. Install into a vertical receptacle with the RJ45 connection facing down to maintain enclosure rating.

2. Device is not intended for use with an extension cord.

3. For indoor use and installation only.

The RX1i intelligent relay is designed to be plugged into a stan-

dard 120Vac wall outlet mounted on a vertical wall surface.

A screw tab is provided which can be used to fix the relay to the

wall outlet preventing accidental disconnection from the recep-

tacle.

Equipment to be controlled is then plugged into the outlet on

the RX1i. When the RX1i is activated, power will be switched to

the outlet on the RX1i from the wall outlet.

NOTICE:

Plug the relay fully flush into a wall receptacle.

Do not plug the relay into an extension cord.

DANGER Electrocution Hazard

the relay; there are no user-serviceable parts inside.

DANGER Risque d'électrocution

l'utilisateur.