Cor HA-6400 매뉴얼 - 페이지 7

{카테고리_이름} Cor HA-6400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cor HA-6400 10 페이지. Setup using the tp-link router

INSTALLATION AT THE HOME

Suggested extra tools and items to have available during installation include:

S Outlet power strip

S Small step ladder

S Cordless power drill

S Ethernet cables

S Wi−Fi repeater

S 319.5 MHz repeater (part number 80−922−1)

S Magnetic strip (or remove and use magnet from Door/Window sensor)

S Power Over Ethernet (POE) switch – Use for Outdoor Cameras

Step 1

Locate the Homeowner's primary router and plug an Ethernet cable to the blue port on the back of the TP−Link router after it is powered up.

Step 2

Plug the transformer from the Côr panel to a power outlet after placement of the panel either using the wall mount or desk stand.

Step 3

Confirm the Côr panel is connected to the network.

If the Côr panel announces "IP is not ready", login to the Côr panel using Wi−Fi Discovery. Otherwise, go to Step 4.

S On a mobile device or tablet, go to Network Settings and enable Wi−Fi

S Find and connect to "ZEROWIRE_xxxx"

S Launch a web browser (Safari, Internet Explorer, etc.) and type in 192.168.1.3 in the address field at the top

S Sign in as the installer