Highway Equipment Company NEW LEADER G4 확인 방법 - 페이지 12
{카테고리_이름} Highway Equipment Company NEW LEADER G4에 대한 확인 방법을 온라인으로 검색하거나 PDF를 다운로드하세요. Highway Equipment Company NEW LEADER G4 13 페이지. Spread pattern
페이지 인쇄PROBLEMS
Heavy Directly
Behind the Vehicle
Light Directly
Behind the Vehicle
Pattern Off Center
G
4
TROUBLESHOOTING
PATTERNS
12
HIGHWAY EQUIPMENT COMPANY
RECOMMENDED ADJUSTMENTS
1. Move the spinner forward (toward the
conveyor).
2. Decrease spinner RPM.
3. Move one or two spinner blades to a
lower numbered hole.
1. Move the spinner rearward (away
from conveyor).
2. Increase spinner RPM.
3. Move one or two spinner blades to a
higher numbered hole.
1. Check to see feedgate is level and free
of caked material.
2. Check to make sure individual spinner
speeds are equal.
3. Check to be sure spinner assembly is
mounted squarely and centered.
4. Testing should be done parallel to
wind.
305438-SP-A
Page Rev. A