Dynex DX-PCIGB 사용자 설명서 - 페이지 9
{카테고리_이름} Dynex DX-PCIGB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-PCIGB 20 페이지. User manual (french)
Dynex DX-PCIGB에 대해서도 마찬가지입니다: (영어) 사용자 가이드 (20 페이지), (프랑스어) 가이드 사용자용 (20 페이지)
페이지 인쇄Troubleshooting
3 Double-click Network adapters to display the list of
network adapters. You see Dynex Gigabit PCI Adapter.
You should see a yellow exclamation point or red "X" over
the icon adjacent to Dynex Gigabit PCI Adapter, your
adapter is not installed correctly or may have a problem.
Double-click Dynex Gigabit PCI Adapter to read the
explanation of the problem. This information will be
helpful if you need to contact a Dynex technical support.
Verify cable connections
To verify cable connections:
1 Make sure that the computer(s) you are troubleshooting
are connected correctly.
2 Each network adapter must be connected to the network
with Category 5 UTP (unshielded twisted pair) cables.
3 Examine the network cables and make sure that they have
not been damaged.
4 Make sure that no electromagnetic interference, like
unshielded speakers or appliances on the same circuit, is
affecting your network.
5 If you are using a hub, router, or switch, make sure that
your network cables are not plugged into a dedicated
Uplink port. The Uplink port is only used when connecting
your hub to another hub or switch.
9