highwood Adirondack AD-KING1 조립 설명서 - 페이지 2

{카테고리_이름} highwood Adirondack AD-KING1에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. highwood Adirondack AD-KING1 2 페이지. Folding & reclining adirondack chairs
highwood Adirondack AD-KING1에 대해서도 마찬가지입니다: 조립 설명서 (2 페이지)

페이지 인쇄

BACK

BACK SUPPORT BRACE

BOARD FROM STEP 3

FRONT LEG BRACE

NEVER adjust the level of recline while you are sitting in the chair, or while anyone else is in the chair.

Always adjust with an empty chair and ensure that the back support is completely secure in the recline

slots on each side of the chair. To fold the chair, lift the back support and gently push down on the back

ARM

FACES OUT

LEG

SEAT

IMPORTANT NOTE!

of the chair. The chair will collapse down to the floor level.

For information on Care and Cleaning or to Register your

highwood product, please visit www.highwood-usa.com.

STEP 4-5

Attach Arm to Back using Bolt C.

Insert Bolt from Arm, through Back

Support Side, into the Back.

(Note: Screws face outward on Back

Support Brace)

Repeat on other side.

STEP 6-7

Turn chair over. Place Washer

D in between Seat and Leg.

Attach using Bolt B.

Repeat on other side.

STEP 8-9 FOR AD-KING1 MODELS

with included Front Brace ONLY

**A Front Leg Brace is not included with

AD-CHL1 and AD-ADRID29A Models.**

Attach Front Leg Brace to Front Leg using

(2) A Screws.

Repeat on other side.

AD-CHL1|AD-ADRID29A|AD-KING1

07.06.21

PAGE 2 OF 2