highwood Sequoia Professional Ridgecrest 조립 설명서 - 페이지 6
{카테고리_이름} highwood Sequoia Professional Ridgecrest에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. highwood Sequoia Professional Ridgecrest 16 페이지. Commercial grade
페이지 인쇄
Important!
Use a Level to
Ensure Each Post is
Post
Plumb in Both
Directions Before
Anchoring them to
the Ground.
X
SEQUOIA
PROFESSIONAL
by
highwood
PERGOLA ASSEMBLY
Level
X
For information on Care and Cleaning or to register your SEQUOIA
PROFESSIONAL product by highwood , please visit
www.highwood-usa.com.
7) Stand the Arch Assembly Up and Move to the Desired
Location. If a Specific Orientation is Desired, Measure
from Each Post to the Edge of an Adjacent Surface or
Structure, Making Adjustments to Each Post as Needed to
Achieve Equal Measurements. This Will Ensure the
Pergola is Square with the Surface it Sits on, such as a
Patio or Deck. Space the Bottoms of the Posts to Ensure
the Spacing Shown Below.
8) Once the Arch is in the Desired Location, Support
or Add Braces to Hold it Upright While it is Anchored
to the Ground. Using Anchors (not included)
Appropriate for the Anchoring Surface, Secure the
Arch Using (2) Anchors in Each Metal Angle Bracket
"F". The Brackets will Support Up to a
Anchor.
113 5/8"
5
" Diameter
16
CM-PGLA-1212
04.30.21
PAGE 6 of 16