Maico MC 250 지침서 - 페이지 8
{카테고리_이름} Maico MC 250에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Maico MC 250 19 페이지.
페이지 인쇄5.
PRIMARY DRIVE
The primary
clutch is by means of a double-row
7/32"
in the MC
7/32"
x
an endless type and has 54 links. The manufac-
ture is RENOLD.
recommended.
-
-
6.
MAGNETO. IGNITION COILS
The Magneto. an APPT MZ 65 rotates in the
-
same direction
attached to the right crankshaft
outer journal.
proper position
coil, condensor and contact breaker are moun-
ted on the stator. The main coil is mounted
under the fuel tank and fastened to the frame.
-
The manufacturer
BOSCH
7.
CLUTCH
The clutch
shaft. It is an oilbath
different
is used in conjunction
ry chain. It has six toothed
which are 99 mm in diameter and the final outer
clutch plate which has a cork facing. Eighten
stacked saucer type springs are used with the
440.
and
-
ches. The smaller unit with 99 mm diameter
plates and a triple link chain, or the unit with
119 mm diameter plates, also triple link chain.
The MC 501 comes with the larger diameter
-.
only.
Small Diameter Clutch:
Six outer toothed
-
plates without
with a cork facing and one pressure plate locked
with 2 rings. Twenty
-
in series of 2.
Large Diameter Clutch:
Six outer toothed
five inner toothed
saucer type springs stacked singly.
drive from the crankshaft
250
and a triple-row
400, 440
501.
in the
and
Other brand chains are not
n
•
as the motor cycle moves. It is
on a tapered
A 4 mm screw determines
of the magnet. The primary
#
is PRUFEX
#
0221500800.
PA
is attached to the transmission
clutch which is built in three
250
models. The MC
has a clutch which
with the double row prima-
outer clutch plates
There is a choice of two different
plates and six inside toothed
any facing and one outside plate
saucer type springs stacked
plates with a cork facing and
plates without
to the
chain 3/8"
x
3/8"
chain
The chain is
5. Primary drive
the
140/1,
BZ
or
6. Ignition
main
400
clut-
7. Wiring Diagram
unit
facing. Twenty
8. Small Duplex clutch
()
()
compl.
00
Disassercbled