Coral UVCGY1 소유자 매뉴얼 - 페이지 15
{카테고리_이름} Coral UVCGY1에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coral UVCGY1 18 페이지. Coral uv sanitizer and dryer
페이지 인쇄Troubleshooting
This is a general troubleshooting section which covers questions you may have. For up-to-date FAQs
or for anything not covered here, please contact Coral UV or visit www.coraluv.ca.
There is no power to the product.
Items aren't drying.
I think a UV light is out.
The basket is not sitting properly in the chamber.
There are watermarks or fingerprints in the
chamber.
I can't remove the protective cover.
A UV bulb broke.
Specifications
Model
Certifications
Dimensions (H x W x D)
Net Weight
Power Consumption
Rated Voltage
Contact
Email:
Toll Free: 1-(833)-CORALUV (267-2588)
Web:
www.coraluv.co
@coraluvbaby
@coraluvbaby
@coraluvbaby
• Ensure the product is plugged in to an outlet.
• The lid must be securely closed for the product to operate.
• The PRESS button on the front should be illuminated.
• Ensure that prior to inserting items into the chamber, that all excess
water is removed.
• Check to see the air filter is not blocked.
• Ensure there is adequate space behind the product for proper airflow.
• Change the air filter if it is older than 3 months old.
• Ensure the product is on a level surface.
• Set the timer for a longer dry time.
• When the product is powered on, there are two viewing windows on
the lid of the product. These are illuminated either during the Sanitize
setting, or during the sanitization cycle of the AUTO setting. See
Operation Modes
for more information.
• Ensure the bulbs are installed correctly.
• Ensure the lid is securely closed.
• Place the basket in the chamber as described in
• Follow the guidelines described in
• Use the extraction tool as described in
• Follow the guidelines in
UVCGY1
CE, ETL (U.S. and Canada)
9.7 x 10.6 x 10.6 inches (24.5 x 27 x 27 cm)
5.7 lb (2.6 kg)
85 Watts
110-240V, 50-60 Hz
Coral UV Sanitizer and Dryer
Basket
Clean the
Product.
Replace the UV
If a UV Bulb
Breaks.
Alignment.
Bulbs.
15