Adesso 6103-01 조립 지침
{카테고리_이름} Adesso 6103-01에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Adesso 6103-01 2 페이지. Gilroy table lantern
페이지 인쇄
Bulb (Not Included)
60 Watt
Top of wire base
Socket
Wire
base
In line on/o switch
ASSEMBLY INSTRUCTIONS FOR
GILROY TABLE LANTERN
Model # 6103-01
Brass mesh
Screw driver
2
Screw
Rubber pad
1
1. Place brass mesh plate onto the bottom wire
groove.
2. Screw brass mesh plate onto the top of wire base
using the screw and screw driver.
3. Place the rubber pad onto middle of brass mesh
plate so it will sit between the brass and black
mesh plates.
4. Place black mesh plate onto rubber pad and fix it
Black mesh
by screwing on the knurled screw part.
5. Install the bulb (Not Included) by screwing it
Knurled screw part
into the socket. Refer to the label on the lamp
socket for maximum wattage information.
6. Spin black mesh plate for visual e ect when light
is turned on.
3
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one
blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will
fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug.
Wire groove
If it still does not fit, contact a qualified
electrician. Never use with an extension cord
unless plug can be fully inserted.
DO NOT ALTER THE PLUG.
BULB TYPE: (1) 60Watt
Plug
(1) Screw driver
(1) Knurled part
(1) Rubber pad
6103-01
PARTS DIAGRAM:
(1) Screw
353 West 39th Street – 2nd Floor
New York, NY 10018
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
1.0