Galvin Safe-Cell 50107C 제품 설치 매뉴얼 - 페이지 3

{카테고리_이름} Galvin Safe-Cell 50107C에 대한 제품 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galvin Safe-Cell 50107C 4 페이지. Manual prison tapware

1. Disassembly

 Disassemble components, leaving bottom

nut on the body.

 Do not remove the ceramic cartridge

3. Fit dress flange

 Fit onto dress flange and hand tighten.

 Tighten bottom nut

 Tighten nuts holding the breach piece.

5. Fit lock sleeve



Fit lock sleeve and tighten to lock entire

unit in position.

Version 2, 13 June 2017, Page 3 of 4

2. Fit basin body



Insert the basin body assembly up through the pre-

cut hole.

4. Fit dress flange with Anti-Rotation pin



If the anti-rotation option is required, fit dress flange

onto body and mark the basin/sink, remove the flange

and drill 3/16" hole



Replace the flange and screw in the grub screw to lock.

6. Assemble handle and test



Fit handle with tamper proof screw, ensure the correct

water temperature identification button is in the handle



Screw must be tightened before the unit is tested



Once temperature indicator is fitted, check the

operation of the unit and inspect for any leaks.