Dynex DX-CR112 사용자 설명서 - 페이지 5

{카테고리_이름} Dynex DX-CR112에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-CR112 11 페이지. Lecteur de cartes mémoire sd/microsd
Dynex DX-CR112에 대해서도 마찬가지입니다: 매뉴얼 (6 페이지), 자주 묻는 질문 (5 페이지), 사용자 설명서 (11 페이지), 빠른 설정 매뉴얼 (2 페이지), (영어) 사용자 가이드 (11 페이지), (프랑스어) 매뉴얼 드 뤼용자 (11 페이지)

SD/MicroSD Memory Card Reader

Using your card reader

To access a media card using Windows:

1 Plug the memory card reader into a USB port on your PC.

2 Insert a card into the appropriate slot, as shown in the table on page 4. A new drive

icon appears in My Computer/Computer and Windows Explorer(Windows 7).

Caution: Cards must be inserted into the correct slot and in the correct direction, otherwise,

3 Open My Computer/Computer or Windows Explorer, then double-click the appropriate

drive icon to access the data on the memory card.

4 To access files and folders on the memory card, use normal Windows procedures for

opening, copying, pasting, or deleting files and folders.

5 When you have finished working with the files on the memory card, right-click the

memory card icon in My Computer/Computer or Windows Explorer, then click Eject. The

data LED on the memory card reader turns off.

Caution: Do not insert or remove memory cards while the data LED on the reader is flashing.

To access a media card using Macintosh OS 10.4.x or higher:

1 Plug the memory card reader into a USB port on your Mac.

2 Insert a card into the appropriate slot, as shown in the table on page 4. A new drive

icon appears on the desktop.

Caution: Cards must be inserted into the correct slot and in the correct direction, otherwise

3 When you have finished working with the files on the memory card, drag the disk icon

to the Trash or click the disk icon and select Put Away from the File Menu.

Caution: Do not insert or remove memory cards while the data LED on the reader is flashing.

LED indicators

Indicates when a slot is reading from or writing to a card.

• LED off–Your card reader is not being used

• LED on–A card is inserted in one of the slots

• LED flashing–Data is being transferred to or from a card and the hard drive or another

card

Formatting a memory card (Windows)

Caution: Formatting a memory card permanently deletes all files on the card. Be sure that

If your computer has trouble recognizing a new memory card, format the memory card in

your device (refer to the documentation that came with the device) or by using the following

procedure.

you may damage the card and/or the slot.

Doing so may cause damage to your card or loss of data.

you may damage the card and/or the slot.

Doing so may cause damage to your card or loss of data.

you copy any valued files to a computer before formatting a memory card. Do not

disconnect the card reader or remove the memory card while formatting is in progress.