Galvin Engineering Assist 41978CP 설치 매뉴얼

{카테고리_이름} Galvin Engineering Assist 41978CP에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galvin Engineering Assist 41978CP 5 페이지. Hand shower with inverted centre t 700x1100 ss hygienic grab rail

Product Installation Guidelines
®
GalvinAssist
Centre T 700x1100 SS Hygienic Grab Rail
PRODUCT CODES:
-
41978CP (Chrome Hose & Handpiece)
-
41978 (White Hose & Handpiece)
SPECIFICATIONS
The GalvinAssist
®
range of Stainless Steel grab rails provides safe and reliable fixtures for
WC's and accessible areas in health institutions, hospitals and detention facilities.
All the items can comply with clause 17 of AS 1428.1-2009 if positioned correctly according to
the standard.
IMPORTANT: All Galvin Engineering taps are tested in accordance with AS/NZS 3662 and
leave our premises in good working order.
WARNING: Special attention to be paid on notes, photos, images, or drawings of assembly
steps marked with the warning symbol.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Finish
The shower may not be suitable for use in gravity-fed water heaters, low pressure supply networks,
instantaneous water heaters, tempering valves and thermostatic mixing valves. (AS3662-2013).
For use with potable water only. Not suitable for low or unequal pressure water supply.
NOTE: Galvin Engineering continually strive to improve their products. Specifications may change
without notice.
TOOLS REQUIRED
Power drill
Spanner or adjustable crescent
© Galvin Engineering Pty Ltd
Hand Shower with Inverted
th
Version 1, 4
Version 1, 4 September 2023, Page 1 of 5
41978CP
41978
½" BSP – Female
Handheld Shower
N/A
Min
150
Max
500
Min
5
Max
55
41978CP
8.24
41978
5.62
N/A
September 2023, Page 1 of 5
Document No.: 001.00.40.02