Dynex DX-E102 사용자 설명서 - 페이지 7

{카테고리_이름} Dynex DX-E102에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-E102 16 페이지. User manual (french)
Dynex DX-E102에 대해서도 마찬가지입니다: (설치 가이드 (16 페이지), (프랑스어) 설치 가이드 (16 페이지)

페이지 인쇄

Desktop 10/100Mb Network Card

Troubleshooting

If you are having problems with your network, check the following:

Verify adapter installation

If your adapter is not installed correctly, including the network system software or device

drivers, your network will not function correctly.

To verify that your adapter is correctly installed:

1 Click Start, then right-click My Computer and click Properties. The System

Properties window opens.

2 Click the Hardware tab and click Device Manager. The Device Manager window

opens.

3 Double-click Network adapters to display the list of network adapters.You see

Dynex DX-E102 PCI 10/100Mb Network Adapter.

If you see a yellow exclamation point or red X over the icon adjacent to Dynex PCI Adapter,

your adapter is not installed correctly or may have a problem. Double-click Dynex PCI

Adapter to read the explanation of the problem. This information will be helpful if you need

to contact a Dynex technical support.

Verify cable connections

• Make sure that the computer(s) you are troubleshooting are connected correctly.

• Each network adapter must be connected to the network with Category 5 UTP

(unshielded twisted pair) cables.

• Examine the network cables and make sure that they have not been damaged. Also,

make sure that no electromagnetic interference, like unshielded speakers or

appliances on the same circuit, is affecting your network.

• If you are using a hub, router, or switch, make sure that your network cables are not

plugged into a dedicated Uplink port. The Uplink port is only used when connecting

your hub to another hub or switch.