Dynex DX-E202 사용자 설명서 - 페이지 3
{카테고리_이름} Dynex DX-E202에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-E202 12 페이지. User manual (french)
Dynex DX-E202에 대해서도 마찬가지입니다: 자주 묻는 질문 (4 페이지), (설치 가이드 (16 페이지), (프랑스어) 설치 가이드 (16 페이지)
페이지 인쇄
10/100Mb CardBus Network Card
Important safety instructions
Before getting started, read these instructions and save them for later reference.
• Before you install your CardBus network card into your computer, read this user guide.
In some operating systems, the driver must be installed before you install your card.
• Do not drop or hit your network card.
• Do not install your network card in a location that is subject to strong vibrations
because vibration may damage your card.
• Do not disassemble or try to modify your network card.
• Disassembly or modification may void your warranty and could damage your network
card leading to a fire or electric shock.
• Do not store your network card in a damp location. Do not allow moisture or liquids to
drip into your card. Liquids can damage your card leading to a fire or electric shock.
• Do not insert metal objects, such as coins or paper clips, into your network card.
• Your network card is for general computer use. Do not use your card in a computer that
requires exceptional reliability, especially if a breakdown or malfunction of your card
might jeopardize life or health, such as aerospace equipment, atomic power control
systems, traffic-related equipment, transportation equipment, industrial robotics,
combustion equipment, safety devices, and life-support systems.
Features
• Compliance with the IEEE802.3 (10 Base-T) and IEEE802.3u Fast Ethernet (100
Base-TX) specifications
• Support for full-duplex flow control (IEEE 802.3x) for improved performance
• Support for auto-negotiation, which automatically selects IRQ and I/O addresses
• Compliance with the PC Card type II and 32-bit CardBus standards
• PC Card (68-pin) and Network (RJ-45) connectors
• Hot-swappable, Plug-and-Play operation (you can insert or remove the card without
turning off your computer.)
• One LED to indicate network link and activity (the LED is ON when a link is established
and flashes when data is being transferred.)
• One LED to indicate duplex operation (the LED is ON when the card is operating in full
duplex.)
Package contents
Make sure that the package contains the following items:
• DX-E202 10/100Mb Cardbus Network Card
• CD containing drivers and install guide
• This installation guide
3