Dynex DX-DRTVL103 사용자 설명서 - 페이지 6

{카테고리_이름} Dynex DX-DRTVL103에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-DRTVL103 16 페이지. Grand support de montage mural ultra-mince avec inclinaison de - 5° optionnelle
Dynex DX-DRTVL103에 대해서도 마찬가지입니다: 매뉴얼 (6 페이지), (영어) 수동 조립 지침 (16 페이지), (프랑스어) 지침 드 몽타주 매뉴얼 (16 페이지)

페이지 인쇄

Step 1:

Assembly instructions

Adjust the tilt

Note: The tilt on the left TV bracket (02) and right TV bracket (03) must be the same.

Use a Phillips screwdriver to remove the two screws (S) from the outside edges of each TV bracket (02 and 03).

To tilt the TV forward by 5°, push the tilt brackets on the left TV bracket (02) and right TV bracket (03) down.

To keep the TV completely vertical, push tilt brackets on the left TV bracket (02) and right TV bracket (03) up.

Re-insert the two tilt screws (S) into each TV bracket (02 and 03), then tighten the screws.

Caution: Do not over tighten the screws.

Option 1: Mount tilted -5°

Option 2: Mount not tilted

You'll need:

Phillips screwdriver

Tilt

bracket

Tilt bracket

Need help? Call 800-305-2204

DX-DRTVL103