Dynex DX-DRTVM102 사용자 설명서 - 페이지 8

{카테고리_이름} Dynex DX-DRTVM102에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-DRTVM102 16 페이지. Support de montage mural de taille moyenne ultra-mince avec inclinaison de - 5° optionnelle
Dynex DX-DRTVM102에 대해서도 마찬가지입니다: (영어) 수동 조립 지침 (16 페이지), (프랑스어) 지침 드 몽타주 매뉴얼 (16 페이지)

페이지 인쇄

Step 3:

Select screws and spacers

Select the hardware for your TV (screws, washers, and spacers). See the documentation that came with your TV

for screw length and diameter.

Select one of the following types of screws:

Select one of the following types of washers:

For an irregular or obstructed TV back, select one of the following types of spacers:

Hand thread screws into the threaded screw holes on the back of your TV to determine the correct screw

diameter and length. If your TV has an irregular or obstructed back, place a spacer between your TV back and the

screw to make sure you have the correct length.

Screw is

Screw fits

too long

correctly

Remove the screws.

For a flat back TV, go to "Step 4: Install the TV brackets Option 1: Installing for a TV with a flat back" on

page 9.

For an irregular or obstructed back, go to "Step 4: Install the TV brackets (continued) Option 2: Installing

for a TV with an irregular or obstructed back" on page 10.

M4 × 12 mm screws (07)

M4 × 30 mm screws (08)

M5 × 12 mm screws (09)

M5 × 30 mm screws (10)

M4/M5 washers (14)

M4/M5 spacers (16)

Caution: To avoid potential personal injuries and property damage,

make sure that there are adequate threads to secure the brackets to

your TV. If you encounter resistance, stop immediately and contact

customer service. Use the shortest screw and spacer combination to

accommodate your TV. Using hardware that is too long may damage

your TV. However, using a screw that is too short may cause your TV

to fall from the mount.

Screw is

too short

Need help? Call 800-305-2204

M6 × 12 mm screws (11)

M6 × 20 mm screws (12)

M6 × 35 mm screws (13)

M6 washers (15)

M6 spacers (17)

DX-DRTVM102