Dynex DX-DRTVM112 안전 정보 매뉴얼 - 페이지 6

{카테고리_이름} Dynex DX-DRTVM112에 대한 안전 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-DRTVM112 15 페이지. Support mural discret pour téléviseurs
Dynex DX-DRTVM112에 대해서도 마찬가지입니다: (영어) 수동 조립 가이드 (15 페이지), (프랑스어) 매뉴얼 드 몽타주 (15 페이지)

페이지 인쇄

STEP 2 - Determine whether your TV has a flat, irregular, or

obstructed back

Temporarily lay the TV bracket (A) and adapters (C), if necessary, on the back of your TV.

Align the screw holes in the TV bracket with the mounting screw holes on your TV.

Identify which type of back your TV may have:

• Flat back: The bracket and adapters (if necessary) lay flush against the back of your TV and does not

block any jacks. You do not need spacers when assembling the wall mount.

• Obstructed back: The bracket and adapters (if necessary) block one or more of the jacks on the back of

your TV. You will need spacers when assembling the wall mount.

• Irregularly-shaped back: There is a gap between the bracket and adapters (if necessary) and some

part of the back of your TV. You will need spacers when assembling the wall mount.

Remove the TV bracket (A) and adapters (C).