Dynex DX-TVM112 조립 설명서 - 페이지 2
{카테고리_이름} Dynex DX-TVM112에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-TVM112 13 페이지. Quick setup guide (french)
Dynex DX-TVM112에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), (영어) 빠른 구성 가이드 (2 페이지), (프랑스어) 빠른 설치 가이드 (2 페이지)
페이지 인쇄
2
DX-TVM112
Safety information and specifications
IMPORTANT SAFETY INSTRUCTIONS -
SAVE THESE INSTRUCTIONS
CAUTION: Do not use this product for any
purpose not explicitly specified by Dynex.
Improper installation may cause property
damage or personal injury. If you do not
understand these directions, or have
doubts about the safety of the installation, contact
Customer Service or call a qualified contractor. Dynex is not
responsible for damage or injury caused by incorrect
installation or use.
The weight of your TV must not exceed 50 lbs. (22.7 kg). The
wall must be capable of supporting five times the weight of
your TV and wall mount combined.
This product contains small items that could be a choking
hazard if swallowed. Keep these items away from young
children!
Tools needed
You will need the following tools to assemble your new TV wall mount:
ardware
Edge-to-edge stud
finder
Phillips screwdriver
Measuring tape
Pencil
Tape
Safety information and specifications
Maximum TV weight: 50 lbs. (22.7 kg)
Screen size: 26 in. to 40 in. diagonal
Overall dimensions (H × W ):
12.6 × 15.5 in. (32 × 39.4 cm)
Wall-mount weight: 3 lbs.
We're here for you
www.dynexproducts.com
For customer service, call:
800-305-2204 (U.S./Canada markets)
Level
Socket wrench with 1/2"
(13 mm) socket or
adjustable wrench
Hammer
Drill
7/32" (5.5 mm) wood drill bit
for wood stud wall
OR
1/2" (13 mm) masonry drill
bit (concrete only)