Dynex DX-TVM112 조립 설명서 - 페이지 7

{카테고리_이름} Dynex DX-TVM112에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-TVM112 13 페이지. Quick setup guide (french)
Dynex DX-TVM112에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), (영어) 빠른 구성 가이드 (2 페이지), (프랑스어) 빠른 설치 가이드 (2 페이지)

페이지 인쇄

Installation instructions

STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back

1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages

and scratches.

2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV

for instructions.

3 Temporarily lay the TV brackets (B and C) on the back of your TV.

4 Align the screw holes in the TV brackets with the mounting screw holes on your TV.

5 Identify which type of back your TV may have:

• Flat back: The brackets lay flush against the back of your TV and do not block any jacks. You do not need spacers when

assembling the wall mount.

• Obstructed back: The brackets block one or more of the jacks on the back of your TV. You will need spacers when

assembling the wall mount.

• Irregularly-shaped back: There is a gap between a bracket and some part of the back of your TV. You will need spacers

when assembling the wall mount.

6 Remove the TV brackets.

DX-TVM112