Galvin Engineering GalvinAssist CP 제품 설치 - 페이지 4

{카테고리_이름} Galvin Engineering GalvinAssist CP에 대한 제품 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Galvin Engineering GalvinAssist CP 5 페이지. Hand shower with hygienic grab rail

페이지 인쇄

Product Installation Guidelines

5. Fit grab rail into wall mount plate and

tighten lock nut firmly.

7. Cradle Installation

Fit the shower cradle to the grab rail as

shown.

Position the cradle as desired then tighten

the cover of the cradle.

Elbow

9. Connect Flange Wall Outlet Elbow

Fit elbow over spigot and secure with grub

screw.

Using 2.5mm hex key supplied, tighten 5mm

grub screw.

Hex Key

the connection is secured, then turn on water

supply. Check for any leaks.

6. Screw flange cover to wall mount plate.

Flow Regulator

Spigot

8. Connect Flange Wall Outlet Elbow

Apply thread tape to wall spud. When

applying thread tape or sealant to the wall

spud, ensure the opening is not obscured.

Failure to do so may restrict or block the flow

restrictor, affecting the flow of water.

Remove spigot by loosening grub screw in

elbow.

Fit spigot to wall spud, ensuring the flow

regulator is in place and not damaged when

tightening the spigot.

10. Check Shower for correct operation

and leaks

Connect hose and shower head ensuring

Version 1, 25

May 2022, Page 4 of 5

Grub Screw