Galvin Engineering 201.11.70.10 설치 매뉴얼 - 페이지 4

{카테고리_이름} Galvin Engineering 201.11.70.10에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galvin Engineering 201.11.70.10 13 페이지. Lead safe thermostatic mixing valve cabinet

페이지 인쇄

Product Installation Guidelines & Scope of Use

201.13.70.10 – CliniMix

5.0 FLOW SIZING GRAPH

The Galvin

Engineering CliniMix

Characteristic for Mixed Outlet Flow rate versus Balanced Inlet Pressure is shown in the graph below. It is important that

the valve is not oversized for its intended application.

TMV 1500 Lead Safe

™

Thermostatic Mixing Valve is suitable for many applications. The Pressure Loss

NOTE: To ensure optimum performance the minimum outlet flow of the

TMV during operation should be at least 4 litres/minute.

It is important that the valve is sized such that the flow rates from the

outlets are not less than those listed AS/NZS 3500.1

The pipe-work between the TMV and the system must be sized in

accordance with AS/NZS 3500.1 to ensure the water velocity in the pipe-

work is within the allowed limit.

If the TMV is to be installed and operated under unequal inlet pressures,

the lower inlet pressure determines the outlet flow rate. However, for

optimum performance and stability it is recommended that the TMV be

installed with balanced dynamic inlet pressures (+/- 10%).

½" Thermostatic Mixing Valve w/ Cold & Hot Bypass in SS

Cabinet

Version 1, 13 November 2023, Page 4 of 13