Coralife Bio Cube 사용 설명서 - 페이지 11

{카테고리_이름} Coralife Bio Cube에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Coralife Bio Cube 12 페이지. Size 16
Coralife Bio Cube에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지)

Coralife Bio Cube 사용 설명서
WARNING!
Make sure all switches are in the off position and
unplug power cords from power source or outlet
before performing any maintenance.
FIGURE 18
Maximum
Water Level
Minimum
Water Level
Daily Maintenance
1. Visually observe the BioCube lighting and
filtration to make sure that the system is
functioning properly.
2. Check water level. Make sure to replace
evaporated water with freshwater to replenish
water supply (Figure 18).
Note: Use only freshwater to replace
evaporated water for both freshwater and
saltwater setup.
Caution: Do not top off water above the
maximum water level. Do not let water get
below the minimum water level.
Weekly Maintenance
1. Keep BioCube surfaces clean from dust
and debris. Wipe exposed surfaces with
a clean and dampened soft terrycloth.
2. Open canopy and wipe down light lens cover
with a clean and dampened soft terrycloth.
3. Inspect filtration system for clogging and
excessive accumulation of debris. Clean and
remove debris from surface, bottom intake
and overflow tray. Rinse parts if needed.
Note: Do not clean bio-balls. Cleaning the
bio-media is harmful to beneficial nitrifying
bacteria needed to break down ammonia
and nitrites.
Monthly Maintenance
1. Remove used filter cartridge and discard
(Figure 19). Replace with new cartridge.
Note: Make sure to rinse new filter cartridge
with cool freshwater before installing inside
BioCube.
2. Remove sponge filter from wet/dry section.
Rinse and clean sponge with cool freshwater
to remove accumulated organic buildup
(Figure 19).

MAINTENANCE

FIGURE 19
Front
Micron
Filter Pad
(Mechanical
Filtration)
3. Disconnect water pump assembly from output
elbow attachment and detach pump from flexible
tubing (Figure 20).
FIGURE 20
Filter Cartridge
Sponge Filter
Back
Activated
Carbon
(Chemical
Filtration)
Flexible Tubing
Water Pump