hikam A7 초기 설정을 위한 빠른 매뉴얼 - 페이지 3
{카테고리_이름} hikam A7에 대한 초기 설정을 위한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. hikam A7 10 페이지. Smart home wireless ip-kamera
hikam A7에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지)
페이지 인쇄
A7 IP Camera
The Camera for Secure Home.
Quick Guide for Initial Setup (v6.0/09.2017)
English
Before starting setup
Step 1: Make sure of the following:
- Your router supports the 2.4GHz frequency band.
- Your smartphone is connected to the Internet with a WLAN/Wi-Fi that the camera will connects with.
- You smartphone, camera, and router should be within approximately 9 feet during setup. After your camera is set up,
you can move the camera to your preferred location.
- You know the WLAN/Wi-Fi password.
Step 2: Download and install HiKam App. Go directly to Step 3 if the HiKam app is already in your smartphone.
- Get HiKam App from App Store (iPhone/iPad) or Google Play (Android), search "HiKam camera".
- Create your account in the app.
(see picture 1)
Step 3: Start camera
- Remove the camera from its packaging and thread the two antennas to their corresponding labeled connectors.
- Connect the power cord to power on the camera.
- Wait for camera to beep.
If beeping is not heard within one minute press and hold the reset button till a successful reset signal, which is a metallic
clash sound, is heard. Wait another 30 seconds for the camera completing reset. The camera will then start beeping.
Start setup
You can choose either setup via wireless (see Setup Mode 1) or via an Ethernet cable (see Setup Mode 2).
Setup Mode 1: Set up using 'AirLink'
- Log in HiKam app and follow picture 2 through 4. The app will guide you through configurations step by step.
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
Picture 6
- After click "Next" button
the app starts to configure the camera with Wi-Fi. Once the camera receives all
(see picture 4)
configurations from your smartphone, you will hear a sound ("Dong...") signifying that your camera has begun to
connect to the app server through the Wi-Fi router. Once connection is completed you will see the notify "WiFi
configuration successful" in the app, otherwise you will see "Airlink Timeout". In the latter case try one more time. If the
connection fails to complete again, move to Setup Mode 2.
- You will be asked to name the camera and to enter the initial password 123
(see picture 5).
- You will then be asked to enter a new password for your camera, consisting of 6-30 characters
A
(see picture 6).
successful operation will be notified by "Modify successfully" in the app. If this does not happen within one minute, force
quit the app, reset your camera by pressing and hold the reset button, and move to Setup Mode 2.
- You can now follow the live video stream on your smartphone.