Adesso BRONX 6206-01 조립 지침

{카테고리_이름} Adesso BRONX 6206-01에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Adesso BRONX 6206-01 2 페이지. Table lamp

페이지 인쇄

Bulb(Not Included)

60 Watt

Socket ring

Shade

Screw

Socket

3-way rotary

socket switch

Metal plate

Metal hub

Wooden leg

Rubber pad

ASSEMBLY INSTRUCTIONS FOR

BRONX TABLE LAMP

Model # 6206-01

Handle

1. Stick each wooden leg onto the metal hub so that

the metal hub screws go through the wooden leg

and create a tripod stance. Secure the tripod by

screwing the black metal handles onto the metal

hub screws.Be sure to place the rubber pads in

between the wooden leg and the black handle

before screwing on the handle.

2. Place metal socket plate on top of wooden legs

and use small screws to secure the plate to the

legs.

3. Place the shade onto the socket and screw on

socket ring to secure the shade.

4 .Install the bulb (Not Included) by screwing it into

the socket. Refer to the label on the lamp socket

for maximum wattage information.

GENERAL PRODUCT INFORMATION:

This product is suitable

for dry locations only.

IMPORTANT SAFETY INSTRUCTIONS:

This portable lamp has a polarized plug (one

blade is wider than the other) as a feature to

reduce the risk of electric shock. This plug will

ﬁt in a polarized outlet only one way. If the plug

does not ﬁt fully in the outlet, reverse the plug.

If it still does not ﬁt, contact a qualiﬁed

electrician. Never use with an extension cord

unless plug can be fully inserted.

DO NOT ALTER THE PLUG.

Wooden leg

BULB TYPE: (1) 60 Watt

Plug

(1) Screwdriver

(3) Screw

(3) Rubber pad

6206-01

PARTS DIAGRAM:

353 West 39th Street – 2nd Floor

New York, NY 10018

Tel: (212) 736 4440 Fax: (212) 736 4806

www.adessohome.com

1.0