Coram Showers 800 빠른 시작 매뉴얼 - 페이지 4
{카테고리_이름} Coram Showers 800에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coram Showers 800 8 페이지. Shower enclosure
4
Hole
Attach horizontal rails to top and bottom of both fixed
panels using 2 x 32mm screws.
Important: The rails are 'handed' in pairs, the hole in the
rails must be on the inside next to the vertical channel.
6
Carefully position the assembled fixed panels into the wall
channels as shown.
4
Inside
32mm
a
5
Inside
Inside
b
Inside
a: Important: Carefully open a gap between the fixed panel
and the bottom rail and apply sealant to the front and edge of
the glass up to the 'flipper seals' as shown.
b: Attach a glass clamp to each horizontal rail (at edge of
glass) using 10mm screws, tighten by hand only - do not
overtighten. Push fit glass clamp covers.
7
a
b
32mm
c
Attach the corner joints to the top and bottom horizontal
rails using 32mm screws.
Push fit the corner joint covers.
Inside
Inside of
fixed panel
PN50489
10mm
PN50488
PN50486
32mm
PN50487