AGS MERLIN CO2-TFT 설치, 운영 및 유지보수 매뉴얼
{카테고리_이름} AGS MERLIN CO2-TFT에 대한 설치, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AGS MERLIN CO2-TFT 16 페이지. Carbon dioxide & temperature monitor
페이지 인쇄
Installation, Operation & Maintenance Manual
Installation, Operation & Maintenance Manual
The Merlin CO2-TFT is designed to monitor carbon dioxide (CO
The monitor has a digital traffic light style display indicating the carbon dioxide levels and temperature in
the area. When CO
gas or temperature reaches alarm state – this device is able to automatically drive
2
ventilation fans reducing CO
The information contained within this manual should be referenced for typical installation and operation
only. For specific requirements that may deviate from the information in this guide – contact your supplier.
Rev 3 11-20
MERLIN CO2-TFT
Carbon Dioxide & Temperature Monitor
CO
measured and displayed in parts per million (PPM).
2
Temperature can be displayed in degrees Celsius (°C) or Fahrenheit (°F).
0-10V Signal Output progress bar display.
Monitor, record and display average CO
User friendly settings menu.
Pre-alarm and alarm relay output.
Fan controller enabled relay output.
Dual power 100-240VAC or 12-24V.
End of Life notification for CO
Automatically switch between ventilation programs when gas is used.
Boost, Mute and Wake Up button.
Please read this manual carefully and retain for future use.
and/or temperature.
2
concentration over 8 hour periods.
2
sensing element.
2
) in the air and temperature.
2
CO2-TFT
1