Dynojet POWER COMMANDER FC 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Dynojet POWER COMMANDER FC에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet POWER COMMANDER FC 6 페이지. Fuel controller for yamaha zuma 125 2009; yamaha zuma 125 2010; yamaha zuma 125 2011; yamaha zuma 125 2012; yamaha zuma 125 2013; yamaha zuma 125 2014
Dynojet POWER COMMANDER FC에 대해서도 마찬가지입니다: 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지)

페이지 인쇄
Dynojet POWER COMMANDER FC 설치 지침 매뉴얼
FIG.D
FIG.E
FIG.F
IFC17019.01
www.powercommander.com
ground
harness
6
Attach the ground wire from the PCFC harness to the negative side of the
battery as shown in Figure D.
7
Using the supplied velcro, secure the PCFC to the top of the ECU as shown in
Figure E.
Make sure to clean both surfaces before attaching with the alcohol swab.
8
Reinstall side cover and seat.
2012-2014 Kawasaki Brute Force 750
Use the following instructions for the 2012-2014 models.
1
Remove the seat.
2
Remove the right hand side cover, and the cover in front of the steering stem
that holds the accessory outlet as shown in Figure F.
The shifter knob and key switch will need to be removed to pull the right side
cover off.
2008-2014 Kawasaki Brute Force 750 - 4