Coram Showers OPTIMA Series 매뉴얼 - 페이지 4

{카테고리_이름} Coram Showers OPTIMA Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coram Showers OPTIMA Series 16 페이지.

Push fit the 'short flipper seals' onto the top and bottom

edges of the fixed panel - flush against the metal profile.

Ensure the flipper seal 'flaps' are on the inside of the

fixed panel.

Note: Wetting the glass with water will help to fit the seals.

Outside face

of fixed panel

Position the 'magnetic

profile' into the other

wall channel and

slide down so that

it fully slots onto the

end moulding of the

bottom rail.

Outside

face of

fixed

panel

Position the fixed panel into the required wall channel and

slide down so it fully slots onto the end moulding of the

bottom rail. Inside the enclosure, ensure the panel sits in

the 'fixed panel bracket', slide the bracket along the rail

and position under the panel as shown.

Position the top rail onto the top of the 'fixed panel' and

'magnetic profile'. Adjust the position of the fixed panel

bracket as required. Line up the holes and fix using 2 x

13mm screws.

Fixed

panel

bracket

13mm

Inside