Coram Showers PREMIER 매뉴얼 - 페이지 10

{카테고리_이름} Coram Showers PREMIER에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coram Showers PREMIER 16 페이지. Double sliding door / side panel
Coram Showers PREMIER에 대해서도 마찬가지입니다: 설치 지침 (4 페이지)

페이지 인쇄

a: Place the wall channels on the tray ensuring they are vertical and an equal distance back from the front of the tray.

Place masking tape against the wall before marking drill hole positions, this will help prevent the drill bit slipping. Drill 6.5mm

holes, 30mm deep and insert the wall plugs. b: Apply sealant to the back of the wall channels and around the fixing holes.

c: Fix the wall channels to the walls using 8 x 32mm screws.

H2O label

on outside

of side

panel.

a: Insert the side panel into the wall channel (ensuring that the H2O label is on the outside of the enclosure). Fit the corner post

onto the side panel. IMPORTANT: The corner post MUST be fitted as shown above.

b: Ensure that the corner post is vertical and the same distance in from the edges of the tray as the wall channels.

ø 6.5

X = Door widths

1500 = 1450 - 1500mm

1700 = 1650 - 1700mm

Note: Assembly

with side panel on

the left hand side

shown from now on.

Y = Side Panel widths

700 = 670 - 695mm

760 = 735 - 760mm

800 = 775 - 800mm

900 = 875 - 900mm

Inside

32mm