Coram Showers PREMIER 매뉴얼 - 페이지 4

{카테고리_이름} Coram Showers PREMIER에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coram Showers PREMIER 16 페이지. Double sliding door / side panel
Coram Showers PREMIER에 대해서도 마찬가지입니다: 설치 지침 (4 페이지)

페이지 인쇄

Push fit the 'short flipper seals' onto the top and bottom

edges of the fixed panels - flush against the metal profile.

Ensure the flipper seal 'flaps' are on the inside of the

fixed panels.

Note: Wetting the glass with water will help to fit the seals.

Outside

face of fixed

panels

Outside

face of

fixed

panel

Position the fixed panels into the wall channels and slide

down so they fully slot onto the end mouldings of the

bottom rail. Inside the enclosure, ensure the panels sit in

the 'fixed panel brackets', slide the brackets along the rail

and position under the panels as shown.

Position the top rail onto the top of the

'fixed panels'. Adjust the position of the

fixed panel brackets as required.

Line up the holes and fix using 2 x 13mm

screws.

Outside

face of

fixed

panel

Fixed

panel

bracket

13mm

Inside