Dynojet Power Commander III USB EX 설치 지침 - 페이지 4
{카테고리_이름} Dynojet Power Commander III USB EX에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power Commander III USB EX 4 페이지. 2002-2003 ducati
페이지 인쇄wire wraps
ground wire
i711-411EX
17 Tuck the wires behind the frame and zip tie to
the stock wiring harness. Make sure the wires
will not get pinched.
18 Route the ground wire from the PCIII USB EX
along the right hand side of the frame towards
the battery. Use the stock wire wraps to hold
the ground wire as shown in Figure G.
19 Install the PCIII USB EX in the tail section as
shown using the supplied velcro. There are a
few places to install the unit. Make sure the
unit does not directly touch the exhaust.
20 Insert the cd provided into your computer's
cd-rom drive.
21 Follow the on-screen instructions to install the
PCIII USB EX software.
Visit www.powercommander.com to download
software tutorials and the latest maps.
2002-2003 Ducati 998 - PCIII USB EX - 4