AGS Mini Merlin 설치 및 운영 매뉴얼 - 페이지 13
{카테고리_이름} AGS Mini Merlin에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AGS Mini Merlin 16 페이지. Ch4 co: dual gas detector methane & carbon monoxide
AGS Mini Merlin에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 설치 운영 및 유지보수 (20 페이지)
페이지 인쇄
Installation & Operation Manual
Remote Shut Off Screen
This message will display if the device is integrated with remote shut off devices
such as smoke/ fire alarms.
When activated, the device will isolate the gas supply if installed and configured to do so.
End of Life Screen
This message indicates that the devices gas sensing elements have reached their
expected operational lifecycle.
No gas levels will be displayed.
Contact your supplier and replace the unit immediately.
The expected lifecycle may vary depending on environmental conditions!
General Maintenance
Keep your device in good working order follow these basic principles;
DO carefully remove any accumulated dust from the outer enclosure once a month by
using a slightly damp cloth.
NEVER use detergents or solvents to clean your device – this may permenantly or
temporarily damage the gas sensing elements.
NEVER spray air fresheners, hair spray, paint or other aerosols near the device.
NEVER paint the device. Paint will seal vents and interfere with the device.
High concentrations of alcohol found in many products may damage, deteriorate or affect
the gas sensing elements – such as; wine; deodorants; stain removers; thinners etc.
Other gases and substances to avoid; Corrosives (i.e. chlorine & hydrogen chloride); Alkali
metals; Basic or acidic compounds; Silicones; Tetraethyl lead; Halogens and halogenated
compounds.
Rev: 11 08-20
Mini Merlin
13