Hiking DDS238-4 W 사용자 설명서 - 페이지 7
{카테고리_이름} Hiking DDS238-4 W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hiking DDS238-4 W 15 페이지.
페이지 인쇄
But this ways is only for 1 pcs meter to connection on RS485 wire
10. Display item
INFORMATION
01
Impulse imp/kWh
02
Total energy kWh
03
Positve kWh
04
Reverse kWh
05
Reset energy
06
Real voltage V
Real current A
07
08
Real active power W
09
Real reactive power Var
10
Power factor COSФ
11
Real frequency Hz
12
Meter serial high 6 digits
13
Meter serial low 6 digits
14
MODBUS ID
1． Please scan the two-bar-codes to download the "WISEN" software
插入二维码
二. Meter input power
When the meter power on , you can push the setting button last 5s , meter enter into the status of
waiting for WIFI distribution network and the WIFI led will flash 1s interval .
its means meter enter into the status of waiting for WIFI distribution network . if WIFI led light on
5s , light off 0.1s ,it means meter connect the WIFI successfully.
二. Add device
Please check firstly that your telephone have connected the available WIFI network , then click
the "add device " button .now the meter only used under 2.4GHz WIFI network , it can not use
under 5GHz WIFI network .
LCD DISPLAY
C 0000
000000.00
00000.00
-00000.00
EP0000.00
U 000.0
A 00.00
P 0.0
P 0.0
PF 0.00
F 00.00
H 000000
L 000000
001