GAM Flickermaster DMX 8 운영 지침 - 페이지 2
{카테고리_이름} GAM Flickermaster DMX 8에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. GAM Flickermaster DMX 8 2 페이지. Dmx control
페이지 인쇄FLICKER / STROBE GENERATOR
DMX OPERATION OPTION
• Requires 3 Channels
1. Set all dials to the OFF position and
DMX counter to desired DMX channel.
2. Plug in power (Red Output LED)
Status LED is green when DMX is present.
3. Plug in device or fixture.
4. Start channel controls DIM level
(Start channel + 1) = controls low level
(Start channel + 2) = controls rate/speed
Start channel can be any valid DMX# 1-510
REMOTE OPERATION OPTION
To control the ON/OFF function remotely, you will need a male
phone jack plug (1/8"
on front panel.
1. Turn ON/OFF by simply using a switch to OPEN/CLOSE
the loop.
©GAMPRODUCTS 8/12
3.17 mm) for the remote receptacle
/
MODE
DMX CHANNEL
DIM
FLICKER
STROBE
BACK VIEW
Page 2 of 2
INCANDESCENT
FLUORESCENT
FUNCTION
1
Dim level
1
Dim level
2
Control low level
3
Control rate/speed
1
Control intensity
2
Control low level
3
Control rate/speed
LED