Dynojet Power Vision 매뉴얼 - 페이지 4

{카테고리_이름} Dynojet Power Vision에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power Vision 7 페이지. For 2019-2022 can-am ryker 600/900
Dynojet Power Vision에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지), 설치 매뉴얼 (6 페이지), 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (7 페이지)

페이지 인쇄

VIEWING THE VEHICLE INFORMATION

This menu allows you to view the device status (paired/not

paired), VIN #, Model ID, ECU serial number, tune compat, and

checksum compat.

Select Vehicle Tools>Vehicle Information.

VIEWING THE DIAGNOSTIC CODES

This menu allows you to read and clear diagnostic trouble

codes.

To read codes, select Vehicle Tools>Diagnostics>Active

Codes.

To clear codes, select Vehicle Tools>Diagnostics>Clear

Codes.

READING THE ECU

This menu allows you to read the ECU. This process takes

about ﬁ fteen minutes.

Select Vehicle Tools>Read ECU.

RESTORING THE ECU

This menu allows you to restore the ECU. Use Restore ECU if

the device does not complete the ﬂ ash or if your vehicle will

not start.

Select Vehicle Tools>Restore ECU.

CONFIGURING GAUGES

Make your Power Vision device yours; display the channels

you want to see with four user-customizable full-color gauge

screens. Each gauge screen has one, two, or four conﬁ gurable

channels. Monitor channels such as Wideband, AFR, and Boost.

Sample gauges shown here; for a complete list of monitors

available, open the tune ﬁ le in Power Core or scroll through the

gauges on the device when conﬁ guring or selecting channels for

the list of options.

From the Main Menu, select Device Tools > Conﬁ gure Gauges.

Select a gauge screen and press Enter.

Select a channel and press Enter.

Select a channel from the list and press Enter.

Select the precision or units for that channel and press Enter.

Continue setting up the remaining channels as desired.

Continue conﬁ guring the remaining gauge screens as desired.

4 KAWASAKI INSTALLATION GUIDE

Engine Speed

6550

Baro

14.1

98200136