Dynojet POWER VISION 3 설치 매뉴얼 - 페이지 9

{카테고리_이름} Dynojet POWER VISION 3에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet POWER VISION 3 9 페이지. 2020-2021 honda rubicon/foreman/trx520
Dynojet POWER VISION 3에 대해서도 마찬가지입니다: 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (8 페이지)

페이지 인쇄
Dynojet POWER VISION 3 설치 매뉴얼
USING THE POWER VISION UPDATE CLIENT
This stand alone application will launch the Update Client
allowing you to update your Power Vision with the latest
fi rmware, retrieve additional tunes, or restore the Power Vision to
the original Dynojet factory settings.
1
Connect the Power Vision to your computer using the included
USB cable.
2
Navigate to the POWERVISION drive attached to your computer
and run the Update.exe fi le.
3
Click Update to load the current fi rmware. If the Update button is
grayed out, your Power Vision already has the latest fi rmware.
4
Click Restore to reload all original Dynojet tune and stock fi les.
5
Click Get Tunes to open the Dynojet Tune Finder. Follow the
instructions to Upload your PV_Info.txt fi le and retrieve new tunes.
6
Click Manual Firmware Update to navigate to and load a version
of fi rmware already saved on your computer.
INSTALLING THE POWER CORE SOFTWARE
Download the Power Core software and take tuning to a whole
new level.
Note: Downloading the Power Core software is optional
and not necessary to use the Power Vision.
1
Go to www.dynojet.com.
2
From the top navigation menu, select Support>Downloads.
3
Click Power Vision 3.
4
Click the Software drop-down and download the Dynojet Power
Core software.
5
Double-click the saved fi le to begin installation. Follow the on-screen
prompts. Refer to the Power Core Help for more information.
Restore Get Tunes
Manual Firmware Update
Help
Firmware Version: 3.9.8297.19316 S/N: PV00029757
1.0.3.0
9