Dynojet POWER VISION 3 설치 매뉴얼 - 페이지 2

{카테고리_이름} Dynojet POWER VISION 3에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet POWER VISION 3 8 페이지. 2020-2021 honda rubicon/foreman/trx520
Dynojet POWER VISION 3에 대해서도 마찬가지입니다: 설치 매뉴얼 (9 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (8 페이지)

페이지 인쇄
Dynojet POWER VISION 3 설치 매뉴얼
INTRODUCTION
RETURN
SCROLL
ENTER
HOME/LOG
SCROLL
ff
I
(>
rr
I
II
\\
I
A
!~
-□
IF
V
1 10J
::;
DYNO.'JET
1
Engine
Speed
S11eed
3450
52
Gear
TP
3
42.1
POWER
VISION OVERVIEW-FRONT
VIEW
USB CABLE PORT
CONNECT TO COMPUTER
DIAGNOSTIC CABLE PORT
CONNECT TO VEHICLE
POWER VISION OVERVIEW-SIDE
VIEW
I
Thank you for purchasing the Power Vision from Dynojet
Research. At Dynojet, our mission is to make every ride
the ultimate ride. The Power Vision allows you to tune
your stock ECU to achieve optimal performance from
your vehicle.
The Power Vision is the device to interface between
your computer and the vehicle ECU. Use the buttons
to navigate the device menus, make selections,
cycle
through the four full-color available gauge screens, and
log data. Connect to the diagnostic port to flash a tune;
use the USB connection to interface between the Power
Vision and your computer.
Make your Power Vision device yours; display the
channels you want to see with four user-customizable
full-color gauge screens. Make the Power Vision your
window into your vehicle; secure the Power Vision to
your dashboard or handlebars to monitor any desired
set of gauges such as Throttle Position, Engine Speed,
and more. Wideband Air:Fuel Ratio and integrated belt
temperature can be added as channels to the PV3's
monitors by adding the accessories available at
www.dynojet.com.
For state of the art technical support, please visit
www.dynojet.zendesk.com.
INSTALLING THE POWER VISION
DIAGNOSTIC
PORT
2 HARLEY-DAVIDSON
INSTALLATION
GUIDE
This installation
was done on a Harley-Davidson
Night
Rod. Your bike and set-up may vary.
1 Attach the diagnostic cable to the diagnostic port on the
Power Vision and to the diagnostic port on the vehicle.
Refer to the Diagnostic Port Location on page 3.
Note: The Power Vision may be damaged if installed
improperly. The location of the diagnostic port varies
depending on the model, please refer to a service
manual or contact Dynojet for the exact location.
Use caution as many models use the same style
connector for accessories; your Power Vision MUST be
connected to the diagnostic port.
98200108